Waterski Features
Rocker
- Continuous Rocker – A continuous rockerline through the tip and tail of the ski provides a considerably more stable and forgiving feel in transitions from edge to edge in the build-up to the apex of your cut, while without a flat spot, there is no longer a pivot point allowing for reduced sticking points and allows for consistency and comfort both on your on and off-side
- Increased Flat Spot – Increased the sweet spot from your front foot to halfway down the back, providing a bigger sweet spot, a more predictable feel from your ski, providing greater drive through the ski, and increased hold and angle in turns.
Flex
- Flex Rating(1=Soft, 10=Stiff) – 10/10, (this guys a winner)
Core
- Secret ProBuild core – The not-so-secret ProBuild core is a PMI machine molded core specifically designed to be light and responsive like other high-end cores and offer an unparalleled amount of feel, giving any skier all the feedback they need on the water.
- Carbon Rods – Optimising the flex in the ski’s turning so you can pivot and drive out of turn like a race car
Laminates
- TeXtreme Carbon – A bi-directional Carbon layer that uses wider, flatter carbon taping allowing for the ultimate strength and torsional rigidity
- Innegra Technology -A rubber dampening layer placed under the later of carbon allows for energy distribution, in return reducing vibration
Shape
- 2/10″ Wider than Vapor – This Vapor inspired Senate takes everything you could imagine from the Vapor and adds 2 tenths of an inch to the width to add that little bit of stability and give it greater float at slower speeds
- Steeper Hybrid Bevel – This sharp blended bevel allows for greater ability to lean into turns for more angle while providing greater deceleration into the turn and a tighter radius at the top of your cut
- Wider For-body – an increase in width in the for-body of the ski not only creates stability but also allows you to stand over the top of the ski with more confidence before heading into your turns
- Reduced Tail Width – Allows the ski to drift in the tail mid-turn and stay planted all at once, giving you more angle in your turn.
Concave
- Full Edge to Edge Concave – a full concave throughout the whole width of the ski creates a fluid motion and greatly supports your cut, giving you the ability to focus on where you want to place the ski.
- Depth – Increased depth throughout the entire length of the ski creates more lift and support while also adding greater volume; this, in turn, translates to greater push on the outer bevels of the ski and an easier ability to pivot into your edges and a tighter turn radius
Other Features:
- Switchblade Adjustable Fin
- Tru-Line Boot and Fin Inserts
Level
- Riding Ability: Intermediate/Advanced
- Ski Type: Cross-Over
- Ski Speeds: 28-34Mph
Size
- (65″) – Up to 77Kgs
- (67″) – 73-91Kgs
- (69″) – 82-100Kgs
Warranty
- 1 Year Manufacturer Warranty
Boot Features
Flex
- Mid Flex
Liner & Lacing
- Symmetrical Footbed – Whether your left or right foot forward, you will be able to have increased comfort
- Medium Density Footbed – Provides increased response and comfort
- Double Lacing for convenience
- Wrap Tech Level 1
Baseplate
- Feather Frame Chassis – Reduces Weight and creates a more natural flex in line with the ski.
Additional Features
- Single 3D Molded Tongue
- Stitch Lines to stop delamination
Warranty
- 1 Year Manufacturer Warranty