The Vector BOA is Radar‘s high-end open-toe boot with a twist. Still built upon both comfort and response, but with an added BOA coiler for the bottom lace, giving you unparalleled power over how your boot tightens. Response flows from the Carbitex taping along the boot to give more feel to the Vector boot than ever before. Keeping the symmetrical footbed so anyone can still use the ski, though having the combination lacing for convenience, as well as a feather frame chassis and medium-density footbed, to allow for that true feel and response from your ski.
Waterski Features
Rocker
- Continuous Rocker – A continuous rockerline through the tip and tail of the ski provides a considerably more stable and forgiving feel in transitions from edge to edge in the build-up to the apex of your cut, while without a flat spot, there is no longer a pivot point allowing for reduced sticking points and allows for consistency and comfort both on your on and off-side
- Increased Flat Spot – Increased the sweet spot from your front foot to halfway down the back, providing a bigger sweet spot, a more predictable feel from your ski, providing greater drive through the ski, and increased hold and angle in turns.
Flex
- Flex Rating(1=Soft, 10=Stiff) – 10/10, (this guys a winner)
Core
- Secret ProBuild core – The not-so-secret ProBuild core is a PMI machine molded core specifically designed to be light and responsive like other high-end cores and offer an unparalleled amount of feel, giving any skier all the feedback they need on the water.
- Carbon Rods – Optimising the flex in the ski’s turning so you can pivot and drive out of turn like a race car
Laminates
- TeXtreme Carbon – A bi-directional Carbon layer that uses wider, flatter carbon taping allowing for the ultimate strength and torsional rigidity
- Innegra Technology -A rubber dampening layer placed under the later of carbon allows for energy distribution, in return reducing vibration
Shape
- 2/10″ Wider than Vapor – This Vapor inspired Senate takes everything you could imagine from the Vapor and adds 2 tenths of an inch to the width to add that little bit of stability and give it greater float at slower speeds
- Steeper Hybrid Bevel – This sharp blended bevel allows for greater ability to lean into turns for more angle while providing greater deceleration into the turn and a tighter radius at the top of your cut
- Wider For-body – an increase in width in the for-body of the ski not only creates stability but also allows you to stand over the top of the ski with more confidence before heading into your turns
- Reduced Tail Width – Allows the ski to drift in the tail mid-turn and stay planted all at once, giving you more angle in your turn.
Concave
- Full Edge to Edge Concave – a full concave throughout the whole width of the ski creates a fluid motion and greatly supports your cut, giving you the ability to focus on where you want to place the ski.
- Depth – Increased depth throughout the entire length of the ski creates more lift and support while also adding greater volume; this, in turn, translates to greater push on the outer bevels of the ski and an easier ability to pivot into your edges and a tighter turn radius
Other Features:
- Switchblade Adjustable Fin
- Tru-Line Boot and Fin Inserts
Level
- Riding Ability: Intermediate/Advanced
- Ski Type: Cross-Over
- Ski Speeds: 28-34Mph
Size
- (65″) – Up to 77Kgs
- (67″) – 73-91Kgs
- (69″) – 82-100Kgs
Warranty
- 1 Year Manufacturer Warranty
Boot Features
Flex
- Mid-Stiff Flex
Liner & Lacing
- Symmetrical Footbed – Whether your left or right foot forward, you will be able to have increased comfort
- Medium Density Footbed – Provides increased response and comfort
- BOA lower lace
- Bungee Top Lace
- Wrap Tech Level 3
Baseplate
- Feather Frame Chassis – Reduces Weight and creates a more natural flex in line with the ski.
Additional Features
- Single 3D Molded Tongue
- Stitch Lines to stop delamination
Warranty
- 1 Year Manufacturer Warranty